24 Hour Fall Protection – EM 385 (3 Days)

This in-depth Fall Protection – 24 Hour EM 385 training course is designed for those in a leadership position who must also serve as the competent person and supervise other contractors and employees working at an elevated level.

This course includes in-class lectures including PowerPoint and video and hands-on scenarios applying theory discussed to practical workplace situations.

This Competent Person training is a pass/fail program incorporating both written and practical examinations and is based on the requirements of the federal regulations and local legislation that will be discussed and reinforced.

Attendees will learn practical solutions to difficult fall protection problems using appropriate tools and equipment.​

Any fall protection equipment that is required will be demonstrated during class; however, students can bring their own personal fall equipment to class for both demonstration and use. Participants will be required participate in Personal Fall Arrest Systems training (hands-on exercises), which may include: inspection procedures, donning procedures, fit test, selection, application and care of equipment.

Class Hours:

8:00am – 4:30pm each day

24-Hour HAZWOPER Training Course (3 Days)

OSHA 29CFR 1910.120, the Hazardous Waste Operations and Emergency Response (HAZWOPER) standard states that 24-hours of HAZWOPER training is the minimum requirement for those employees whose job does not require them to handle waste or hazardous materials as part of their job. However, if they are required to respond to such incidents as uncontrolled releases or the potential of uncontrolled releases, they must respond as first responders to control and possibly perform cleanup operations. This 24-hour class is not designed to be as in-depth as the 40-hour HAZWOPER course.

Topics:
Hazard recognition
Introduction to HAZWOPER regulations
Air monitoring methods and instrumentation
Toxicology and exposure guidelines
Respiratory protection
Site entry and reconnaissance and establishment of zones
Decontamination methods
Radiation
Response organization utilizing the Incident Command System
Chemical protective clothing
Table top scenarios and hands-on exercises
End of course exam

Who Should Attend:
Employees who have duties requiring them to respond to uncontrolled releases as First Responders at the Operations level, Hazardous Materials Technicians, Hazardous Materials Specialists, and On-Scene Incident Commanders and employees who are expected to handle or clean up hazardous materials or waste should take the 40-hour HAZWOPER course. This course requires participants to don and doff chemically resistant clothing and participate in response activities. Individuals with medical restrictions should not take this course.

Regulatory Requirements:
OSHA 29CFR 1910.120
EPA Resource Conservation/ Recovery Act (RCRA)

Class Hours:

8AM to 5PM each day

24 Hour Fall Protection – EM 385 (3 Days)

This in-depth Fall Protection – 24 Hour EM 385 training course is designed for those in a leadership position who must also serve as the competent person and supervise other contractors and employees working at an elevated level.

This course includes in-class lectures including PowerPoint and video and hands-on scenarios applying theory discussed to practical workplace situations.

This Competent Person training is a pass/fail program incorporating both written and practical examinations and is based on the requirements of the federal regulations and local legislation that will be discussed and reinforced.

Attendees will learn practical solutions to difficult fall protection problems using appropriate tools and equipment.​

Any fall protection equipment that is required will be demonstrated during class; however, students can bring their own personal fall equipment to class for both demonstration and use. Participants will be required participate in Personal Fall Arrest Systems training (hands-on exercises), which may include: inspection procedures, donning procedures, fit test, selection, application and care of equipment.

Class Hours:

8:00am – 4:30pm each day

24-Hour HAZWOPER Training Course (3 Days)

OSHA 29CFR 1910.120, the Hazardous Waste Operations and Emergency Response (HAZWOPER) standard states that 24-hours of HAZWOPER training is the minimum requirement for those employees whose job does not require them to handle waste or hazardous materials as part of their job. However, if they are required to respond to such incidents as uncontrolled releases or the potential of uncontrolled releases, they must respond as first responders to control and possibly perform cleanup operations. This 24-hour class is not designed to be as in-depth as the 40-hour HAZWOPER course.

Topics:
Hazard recognition
Introduction to HAZWOPER regulations
Air monitoring methods and instrumentation
Toxicology and exposure guidelines
Respiratory protection
Site entry and reconnaissance and establishment of zones
Decontamination methods
Radiation
Response organization utilizing the Incident Command System
Chemical protective clothing
Table top scenarios and hands-on exercises
End of course exam

Who Should Attend:
Employees who have duties requiring them to respond to uncontrolled releases as First Responders at the Operations level, Hazardous Materials Technicians, Hazardous Materials Specialists, and On-Scene Incident Commanders and employees who are expected to handle or clean up hazardous materials or waste should take the 40-hour HAZWOPER course. This course requires participants to don and doff chemically resistant clothing and participate in response activities. Individuals with medical restrictions should not take this course.

Regulatory Requirements:
OSHA 29CFR 1910.120
EPA Resource Conservation/ Recovery Act (RCRA)

Class Hours:

8AM to 5PM each day

24 Hour Fall Protection – EM 385 (3 Days)

This in-depth Fall Protection – 24 Hour EM 385 training course is designed for those in a leadership position who must also serve as the competent person and supervise other contractors and employees working at an elevated level.

This course includes in-class lectures including PowerPoint and video and hands-on scenarios applying theory discussed to practical workplace situations.

This Competent Person training is a pass/fail program incorporating both written and practical examinations and is based on the requirements of the federal regulations and local legislation that will be discussed and reinforced.

Attendees will learn practical solutions to difficult fall protection problems using appropriate tools and equipment.​

Any fall protection equipment that is required will be demonstrated during class; however, students can bring their own personal fall equipment to class for both demonstration and use. Participants will be required participate in Personal Fall Arrest Systems training (hands-on exercises), which may include: inspection procedures, donning procedures, fit test, selection, application and care of equipment.

Class Hours:

8:00am – 4:30pm each day

24 Hour Fall Protection – EM 385 (3 Days)

This in-depth Fall Protection – 24 Hour EM 385 training course is designed for those in a leadership position who must also serve as the competent person and supervise other contractors and employees working at an elevated level.

This course includes in-class lectures including PowerPoint and video and hands-on scenarios applying theory discussed to practical workplace situations.

This Competent Person training is a pass/fail program incorporating both written and practical examinations and is based on the requirements of the federal regulations and local legislation that will be discussed and reinforced.

Attendees will learn practical solutions to difficult fall protection problems using appropriate tools and equipment.​

Any fall protection equipment that is required will be demonstrated during class; however, students can bring their own personal fall equipment to class for both demonstration and use. Participants will be required participate in Personal Fall Arrest Systems training (hands-on exercises), which may include: inspection procedures, donning procedures, fit test, selection, application and care of equipment.

Class Hours:

8:00am – 4:30pm each day

24-Hour HAZWOPER Training Course (3 Days)

OSHA 29CFR 1910.120, the Hazardous Waste Operations and Emergency Response (HAZWOPER) standard states that 24-hours of HAZWOPER training is the minimum requirement for those employees whose job does not require them to handle waste or hazardous materials as part of their job. However, if they are required to respond to such incidents as uncontrolled releases or the potential of uncontrolled releases, they must respond as first responders to control and possibly perform cleanup operations. This 24-hour class is not designed to be as in-depth as the 40-hour HAZWOPER course.

Topics:
Hazard recognition
Introduction to HAZWOPER regulations
Air monitoring methods and instrumentation
Toxicology and exposure guidelines
Respiratory protection
Site entry and reconnaissance and establishment of zones
Decontamination methods
Radiation
Response organization utilizing the Incident Command System
Chemical protective clothing
Table top scenarios and hands-on exercises
End of course exam

Who Should Attend:
Employees who have duties requiring them to respond to uncontrolled releases as First Responders at the Operations level, Hazardous Materials Technicians, Hazardous Materials Specialists, and On-Scene Incident Commanders and employees who are expected to handle or clean up hazardous materials or waste should take the 40-hour HAZWOPER course. This course requires participants to don and doff chemically resistant clothing and participate in response activities. Individuals with medical restrictions should not take this course.

Regulatory Requirements:
OSHA 29CFR 1910.120
EPA Resource Conservation/ Recovery Act (RCRA)

Class Hours:

8:00AM to 5:00PM each day

24 Hour Fall Protection – EM 385 (3 Days)

This in-depth Fall Protection – 24 Hour EM 385 training course is designed for those in a leadership position who must also serve as the competent person and supervise other contractors and employees working at an elevated level.

This course includes in-class lectures including PowerPoint and video and hands-on scenarios applying theory discussed to practical workplace situations.

This Competent Person training is a pass/fail program incorporating both written and practical examinations and is based on the requirements of the federal regulations and local legislation that will be discussed and reinforced.

Attendees will learn practical solutions to difficult fall protection problems using appropriate tools and equipment.​

Any fall protection equipment that is required will be demonstrated during class; however, students can bring their own personal fall equipment to class for both demonstration and use. Participants will be required participate in Personal Fall Arrest Systems training (hands-on exercises), which may include: inspection procedures, donning procedures, fit test, selection, application and care of equipment.

Class Hours:

8:00am – 4:30pm each day

24-Hour HAZWOPER Training Course (3 Days)

OSHA 29CFR 1910.120, the Hazardous Waste Operations and Emergency Response (HAZWOPER) standard states that 24-hours of HAZWOPER training is the minimum requirement for those employees whose job does not require them to handle waste or hazardous materials as part of their job. However, if they are required to respond to such incidents as uncontrolled releases or the potential of uncontrolled releases, they must respond as first responders to control and possibly perform cleanup operations. This 24-hour class is not designed to be as in-depth as the 40-hour HAZWOPER course.

Topics:
Hazard recognition
Introduction to HAZWOPER regulations
Air monitoring methods and instrumentation
Toxicology and exposure guidelines
Respiratory protection
Site entry and reconnaissance and establishment of zones
Decontamination methods
Radiation
Response organization utilizing the Incident Command System
Chemical protective clothing
Table top scenarios and hands-on exercises
End of course exam

Who Should Attend:
Employees who have duties requiring them to respond to uncontrolled releases as First Responders at the Operations level, Hazardous Materials Technicians, Hazardous Materials Specialists, and On-Scene Incident Commanders and employees who are expected to handle or clean up hazardous materials or waste should take the 40-hour HAZWOPER course. This course requires participants to don and doff chemically resistant clothing and participate in response activities. Individuals with medical restrictions should not take this course.

Regulatory Requirements:
OSHA 29CFR 1910.120
EPA Resource Conservation/ Recovery Act (RCRA)

Class Hours:

8:00AM to 5:00PM each day

24 Hour Fall Protection – EM 385 (3 Days)

This in-depth Fall Protection – 24 Hour EM 385 training course is designed for those in a leadership position who must also serve as the competent person and supervise other contractors and employees working at an elevated level.

This course includes in-class lectures including PowerPoint and video and hands-on scenarios applying theory discussed to practical workplace situations.

This Competent Person training is a pass/fail program incorporating both written and practical examinations and is based on the requirements of the federal regulations and local legislation that will be discussed and reinforced.

Attendees will learn practical solutions to difficult fall protection problems using appropriate tools and equipment.​

Any fall protection equipment that is required will be demonstrated during class; however, students can bring their own personal fall equipment to class for both demonstration and use. Participants will be required participate in Personal Fall Arrest Systems training (hands-on exercises), which may include: inspection procedures, donning procedures, fit test, selection, application and care of equipment.

A certificate of completion will be issued at the end of the 3-day training.

Class Hours:

8:00 am – 4:30 pm each day

24 Hour Fall Protection – EM 385 (3 Days – 12/3 to 12/5)

Cost: $795/Participant

12-03-18 – 8:00am – 4:30pm
12-04-18 – 8:00am – 4:30pm
12-05-18 – 8:00am – 4:30pm

This in-depth Fall Protection – 24 Hour EM 385 training course is designed for those in a leadership position who must also serve as the competent person and supervise other contractors and employees working at an elevated level.

This course includes in-class lectures including PowerPoint and video and hands-on scenarios applying theory discussed to practical workplace situations.

This Competent Person training is a pass/fail program incorporating both written and practical examinations and is based on the requirements of the federal regulations and local legislation that will be discussed and reinforced.

Attendees will learn practical solutions to difficult fall protection problems using appropriate tools and equipment.​

Any fall protection equipment that is required will be demonstrated during class; however, students can bring their own personal fall equipment to class for both demonstration and use. Participants will be required participate in Personal Fall Arrest Systems training (hands-on exercises), which may include: inspection procedures, donning procedures, fit test, selection, application and care of equipment.

A certificate of completion will be issued at the end of the 3-day training.

24-Hour HAZWOPER Training Course – DR (3 Days – 10/30 to 11/1)

$350 per person, must attend all 3 days:
10-30-2018 — 8:00 AM to 5:00 PM
10-31-2018 — 8:00 AM to 5:00 PM
11-01-2018 — 8:00 AM to 5:00 PM

OSHA 29CFR 1910.120, the Hazardous Waste Operations and Emergency Response (HAZWOPER) standard states that 24-hours of HAZWOPER training is the minimum requirement for those employees whose job does not require them to handle waste or hazardous materials as part of their job. However, if they are required to respond to such incidents as uncontrolled releases or the potential of uncontrolled releases, they must respond as first responders to control and possibly perform cleanup operations. This 24-hour class is not designed to be as in-depth as the 40-hour HAZWOPER course.

Topics:
Hazard recognition
Introduction to HAZWOPER regulations
Air monitoring methods and instrumentation
Toxicology and exposure guidelines
Respiratory protection
Site entry and reconnaissance and establishment of zones
Decontamination methods
Radiation
Response organization utilizing the Incident Command System
Chemical protective clothing
Table top scenarios and hands-on exercises
End of course exam

Who Should Attend:
Employees who have duties requiring them to respond to uncontrolled releases as First Responders at the Operations level, Hazardous Materials Technicians, Hazardous Materials Specialists, and On-Scene Incident Commanders and employees who are expected to handle or clean up hazardous materials or waste should take the 40-hour HAZWOPER course. This course requires participants to don and doff chemically resistant clothing and participate in response activities. Individuals with medical restrictions should not take this course.

Regulatory Requirements:
OSHA 29CFR 1910.120
EPA Resource Conservation/ Recovery Act (RCRA)